Step 1
Input CPT Data
Step 2
View CPT Data
Step 3
Enter Pile Info
Step 4
Calculate Results

Step 1: CPT Data

Please upload a CSV or TXT file containing the CPT data in the order indicated below. Note the units required. The CPT profile must extend below the maximum pile depth.

The first unit weight entry will be used throughout if no other unit weights are entered.

The depth increment from this CSV file controls the accuracy of the calculations (suggested increment ≤ 0.1 m).

Depth (m) Cone resistance qt (MPa) Cone sleeve friction, fs (kPa) Unit weight (kN/m³)
Sample data loaded — 40 data points with water table at 2.0m. Review below, then continue to Step 2.
Enter zero for offshore site Only hydrostatic conditions are considered in this version
Skip to Step 2 with sample data
or
Try with sample data Load a demo CPT dataset to explore the calculator

Sample CPT Data Preview

Data Summary: 40 rows of sample CPT data
Depth (m) Cone resistance qt (MPa) Cone sleeve friction, fs (kPa) Unit weight (kN/m³)
0.5 2.5 15.0 18.0
1.0 3.8 22.0 18.0
1.5 5.2 28.0 18.5
2.0 7.1 35.0 18.5
2.5 8.5 40.0 19.0
3.0 10.2 48.0 19.0
3.5 12.8 55.0 19.0
4.0 14.5 60.0 19.0
4.5 11.3 45.0 19.0
5.0 8.7 38.0 18.5

Showing first 10 of 40 rows. Continue to Step 2 to view complete data analysis.

Back to Home